• Simple and reliable mount of the video microphone and phone holder allow you to use mic both with smartphone and camera.
• Furry windscreen with foam inside helps to minimize wind and noise when you’re recording video outdoors using on-camera microphone.
• Small handy tripod makes the process of using ribbon microphone more simple and enjoyable.
• FOR iPhone 7, 8, X, 11 use 3.5mm-lightning adapter from Apple

In the Box:

• Video Microphone x1
• Furry Wind Muff x1
• Antishock Mounts x1
• Smartphone Clamp x1
• Mini Tripod x1
• Straight Cable for Smartphone x1
• Curly Cable for DSLR x1
• Cleaner Cloth x 1

The post PowerDewise Video Microphone Kit appeared first on Megsstar Technology.

• DUAL LAVALIER MICROPHONE. With 2 lapel microphone set, you get CLEAR SOUND and don’t need to move one mic from speaker to speaker
• COMPATIBLE: iPhone X, 8, 8 plus, 7, 7 plus, 6, 6s, 5, 5s, iOs and Android smartphone, phone microphone
• PLUG&PLAY no drivers needed for 2 interview microphone to record great podcast. For iPhone 7, 8, X use 3.5mm-lightning adapter from iPhone box

In the Box:

• Lapel Microphone x 2
• Rotating Clip x 2
• Wind muff x 4
• Y-Connector x 1
• Extra cable 6.5ft x 2
• 4 to 3PIN Adapter x 1
• Deluxe pouch x 1
• Cleaner Cloth x 1

The post PowerDewise Dual Microphone Set appeared first on Megsstar Technology.

• Lavalier microphone, designed by PowerDeWise, will take your sound recording quality to the next level
• Due to a well-established technology process the microphone has quality, reliability and protection from extraneous noise
• PLUG&PLAY no drivers needed. FOR IPHONE 7, 8, X, 11 use 3.5mm-lightning adapter from your iPhone box
• COMPATIBLE: iPhone X, 8, 8 plus, 7, 7 plus, 6, 6s, 5, 5s, iOs and Android smartphone

In the Box:

• Lapel Microphone x 1
• Rotating Clip x 1
• Wind muff x 3
• Extra cable 6.5ft x 1
• 4 to 3PIN Adapter x 1
• Deluxe pouch x 1
• Cleaner Cloth x 1

The post PowerDewise Lavalier Lapel Microphone appeared first on Megsstar Technology.

The PRO 24-CMF camcorder microphone is a lightweight, compact stereo condenser ideal for digital recording with high-fidelity stereo sound. Equipped with an windjammer, accessory shoe and permanently attached coiled cable, the microphone features a pair of cardioid elements in an X-Y configuration to provide the spatial impact and realism of a live sound field. The microphone is designed for either battery operation or battery-free operation when used with camcorders that provide plug-in power at the mic input. Like all Audio-Technica mics, the PRO 24-CMF is rugged; it’s built to endure the rigors of field production.

Features:

Stereo microphone designed to attach to a camcorder
For camcorders with an accessory shoe and stereo microphone input
Lightweight, portable design with rugged all-metal construction
Pair of cardioid condenser elements provides spatial impact and high-fidelity stereo sound image
Battery-free operation when used with recording devices that provide plug-in power at the mic input
On/off switch for convenient operation
Permanently attached 15cm – 30cm coiled cable
Right-angle molded 3.5 mm stereo mini plug at output end
Includes camera-mount, windscreen, windjammer, battery and protective pouch

POLAR PATTERN : X/Y Stereo
FREQUENCY RESPONSE : 100-17,000 Hz
OPEN CIRCUIT SENSITIVITY : -50 dB (3.1 mV) re 1V at 1 Pa
IMPEDANCE : 600 ohms
MAXIMUM INPUT SOUND LEVEL : 119 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) : 82 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO : 57 dB, 1 kHz at 1 Pa

BATTERY TYPE : 1.5V LR44
BATTERY CURRENT / LIFE : 0.6 mA / 200 hours typical

WEIGHT : 3.9 oz (111 g)
DIMENSIONS : 4.59″ (116.5 mm) long, 0.83″ (21.0 mm) maximum body diameter
OUTPUT CONNECTOR : 3.5 mm stereo mini plug on cable
CABLE Permanently attached 152.4 mm – 304.8 mm (6″-12″) coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end
ACCESSORIES FURNISHED Video-camera shoe mount; LR44 battery; windscreen; Fur windjammer AT8123 and soft protective pouch

The post Audio Technica PRO24-CMF appeared first on Megsstar Technology.

The MV88+ Video Kit is your mobile professional recording rig. Package includes Manfrotto PIXI Tripod, phone clamp & shoe‐mount mic clip, USB‐C & lightning cables, making it ready for audio and/or video capture right out of the box. The free ShurePlus MOTIV audio & video Apps enable recording control, and the ability to save and share your content in multiple formats.

The birth of a new portable audio & video recording kit is here, giving you all the tools you need, right out of the box.

The MV88+ offers you a whole host of creative set-up options to cover your every requirement:

Features

The post MV88+ Video Kit appeared first on Megsstar Technology.

With its lightweight yet feature-rich design, the AT8024 Stereo/Mono Camera-Mount Microphone offers a simple, powerful solution for capturing high-resolution audio for video. Selectable line-cardioid mono and internally matrixed mid-side stereo modes provide the flexibility to focus the recording on a single sound source or to widen the field for outstanding sonic realism. In either mode, the AT8024 delivers audio that is dramatically better than that supplied by the camera’s internal microphone.

The AT8024 camera-mount microphone also comes equipped with a three-position adjustable attenuator (-20 dB, -10 dB, 0 dB) to capture even soft and very loud sound passages without distortion. A switchable low-frequency roll-off reduces pickup of undesired ambient noise, room reverberation and mechanically coupled vibrations. The microphone is powered by a single AA battery for optimal performance with high max SPL, and features an integral camera shoe mount that attaches quickly to DSLRs and shoe-equipped camcorders.

Features:

*Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphone

*Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment

*Handles loud sound sources without distortion

*Three-position adjustable attenuator and switchable low-frequency roll-off

*Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise

*Compact, lightweight design with integral shoe mount

*Red/green LED power indicator

*Includes windscreen, fuzzy windscreen and AA battery

POLAR PATTERN Mono

POLAR PATTERN LR Stereo

FREQUENCY RESPONSE

The post Audio Technica – AT8024 appeared first on Megsstar Technology.

• Acoustic Principle Line Gradient
• Active Electronics JFET impedance converter with bipolar output buffer
• Capsule 0.50″
• Polar Pattern Supercardioid
• Address Type End
• Frequency Range 100Hz – 16kHz
• Maximum SPL 120dBSPL
• Sensitivity -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
• Equivalent Noise Level (A-weighted) 34dBA
• Weight 73.00g
• Dimensions 79.00mmH x 73.00mmW x 167.00mmD
• Output Minijack Output

The post Rode VideoMic GO appeared first on Megsstar Technology.

The Rode NTG-8 shotgun condenser microphone gives you uncompromising performance in even the toughest conditions. It’s also incredibly directional, even at low frequencies – that means you’re sure to capture the audio you need, without off-axis low-frequency sounds clouding your recording. The NTG-8 is very moisture-resistant, and its low handling noise and self-noise properties make it great for film and broadcast applications in the field. It’s a highly sensitive mic with “you are there” sound quality and excellent RF interference rejection. A water-resistant aluminum storage cylinder, windshield, pouch, and mic clip are included with the Rode NTG-8 shotgun condenser microphone.

Rode NTG-8 Condenser Shotgun Microphone at a Glance:

• Built for any environment
• Lightweight, low-noise
• Excellent directionality, even at low frequencies

Built for any environment

Using a technology known as RF-bias the Rode NTG-8 is almost completely resistant to moisture, making it ideal for recording in any demanding environments where condensation is an issue. Be it in a tropical rainforest, arid desert or sub-zero snowstorm, the NTG-8 can be relied on to faithfully record audio where traditional condenser microphones would fail.

Lightweight, low-noise

In addition to its robust properties, the NTG-8 combines very low weight (less than 1 lbs.), a durable anti-glare finish and incredibly low handling and self-noise (13dBA) to become RODE’s premier A/V microphone.

Excellent directionality, even at low frequencies

Unintended off-axis sounds can ruin an otherwise great recording, and low frequencies are the most likely to intrude (because they travel farther than high frequencies with the same energy). The Rode NTG-8 shotgun mic is exceptionally directional, even at low frequencies. That means when you’re focusing on a sound source, you’re less likely to pick up rumble from the highway, wind, ocean, or whatever.

Rode NTG-8 Shotgun Condenser Microphone Features:

• Designed to withstand adverse environmental conditions
• Very low self-noise
• Very directional, even with low frequencies
• Extremely low handling noise
• High level of immunity to radio frequency interference
• True condenser (external RF biased)
• High sensitivity
• Superior broadcast sound quality
• Designed and manufactured in Australia
• Water resistant aluminum storage cylinder, windshield, zip pouch, and microphone clip included
• Requires +48V phantom power

Tech Specs

• Microphone Type: Shotgun Condenser (external RF Biased)
• Polar Pattern: Supercardioid
• Frequency Response:40Hz-20kHz
• Max SPL:130 dB
• Output Impedance:25 ohms
• Signal to Noise Ratio:81dB
• Self Noise:13dB (A weighted)
• Length:22″
• Connector: XLR
• Weight:0.76 lbs.
• Power: Phantom Power
• Included Accessories: Shock Mount, Aluminum Carry Case, Windscreen

The post Rode NTG-8 appeared first on Megsstar Technology.

Rode NTG4 Shotgun Microphone Features:

• A broadcast-grade shotgun microphone based on the time-tested Rode NTG1
• Premium line-gradient condenser capsule circuitry delivers extremely low noise
• Switchable -10dB pad, 75Hz highpass filter, and high-frequency boost offer added versatility
• Persistent-state digital switching retains settings even after the mic is switched off
• Heavy-duty metal chassis ensures roadworthiness for serious media production
• Includes an RM5 mic clip, a ZP1 padded zip pouch, and a Windshield foam windscreen
• A perfect fit for Rode’s SM3, SM4, SM5, and Blimp shotgun mounts

Tech Specs

• Microphone Type: Shotgun Condenser
• Polar Pattern: Supercardioid
• Frequency Response:20Hz-20kHz
• Max SPL:135dB SPL (1kHz at 1% THD, 1 Kohm)
• Output Impedance:200 ohms
• Signal to Noise Ratio:78dB (A weighted)
• Self Noise:16dB (A weighted)
• Low Cut Filter:75Hz
• Pads:-10dB
• Length:8.86″
• Connector:XLR
• Weight:0.27 lbs.

The post Rode NTG-4 appeared first on Megsstar Technology.

You know you can count on RØDE for an outstanding mic at a great price. And that extends to film and video work! When you need a quality shotgun mic that’s built to perform, you want RØDE’s NTG-2. It’s lightweight, so you’ll have no problems using it as a camera-mounted mic or on a boom pole. The NTG-2 also sounds absolutely great, thanks to its wide frequency range and tight supercardioid pickup pattern.  The NTG-2 comes complete with a mount and a handy windshield.

RØDE NTG-2 Supercardioid Shotgun Microphone Features at a Glance:

• Supercardioid
• Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave
• Maximum SPL: 131dB
• Broadcast sound quality
• Rugged metal contruction
• Condenser microphone transducer
• Weighing 161 grams approx. (5.17 oz.)
• Low noise circuitry
• Low handling noise
• Supplied with stand mount and zip pouch
• Designed and manufactured in Australia

Tech Specs

• Microphone Type:Shotgun Condenser
• Polar Pattern:Supercardioid
• Frequency Response:20Hz-20kHz
• Max SPL:131 dB
• Output Impedance:250 ohms (350 ohms w/Battery)
• Signal to Noise Ratio:76dB (A weighted)
• Self Noise:18dB (A weighted)
• Low Cut Filter:80Hz
• Length:10.94″
• Connector:XLR
• Weight:0.36 lbs.
• Power:Phantom Power, Battery (1 x 1.5V AA)
• Included Accessories:Stand Mount, Windscreen, Carry Bag

The post Rode NTG-2 appeared first on Megsstar Technology.