XS 1 has been designed for first-time and casual users who appreciate simplicity, upfront vocal presence in the mix, and no complications. This versatile new microphone provides professional live sound for those getting started, thanks to its great feedback rejection and silent mute switch for flexibility and control. XS 1 comes in an all-metal housing and therefore is a reliable companion on any stage. As a singer, presenter, or entertainer, you can count on the renowned Sennheiser live sound. All you need to do is: Raise your voice.

Quick guide:

XS 1 dynamic cardioid vocal microphone
Microphone clamp
Transport bag
Quick guide

Technical Specifications:

Dimensions Ø 48 x L 180 mm
Connector XLR -3
Frequency response (Microphone) 55 – 16,000 Hz
Transducer principle dynamic
Pick-up pattern cardioid
Nominal impedance 300 Ω (at 1 kHz)
Min. terminating impedance 1 kΩ
Sensitivity 1.8 mV/Pa (free field, no load at 1 kHz)
Weight w/o cable 330 g (0.73 lbs)
Temperature Range 0 °C … +40 °C (+32 °F … +104 °F)

The post Sennheiser XS 1 appeared first on Megsstar Technology.

Extended high frequency response and supercardioid pick-up pattern for higher signal output, cuts through high on-stage sound levels. Smooth warm tonal response and full dynamic range, with presence lift for vocal clarity and projection. Consistent on/off axis and proximity response maintain sound quality while moving, providing greater on-stage freedom.Full metal construction and extensive suspension and shock-mounting minimize handling noise and signal interference. High output performance microphone, offering power, clarity and projection (also available with a switch: e 845-S).

Key Features

• Dynamic super-cardioid microphone for speech and vocals
• Extended high frequency range
• Consistent sound quality (varying distances, moving off axis)
• Handles high sound pressure levels
• Optional silent on/off switch
• Isolates handling noise, hum compensating coil
• Excellent feedback rejection
• Rugged metal housing

The post e 845s appeared first on Megsstar Technology.

• Excellent live sound featuring Sennheiser’s renowned evolution microphone capsules (e825 or e835)
• Antenna-switching diversity reception
• Integrated antennas
• Automatic frequency management and synchronization via remote channel for easy setup
• Selectable UHF frequencies within a large bandwidth
• Up to 10 compatible channels

• Dimensions :approx. 200 x 42 x 127 mm

• THD, total harmonic distortion :≤ 0.9%

• Pick-up pattern : cardioid

• Signal-to-noise ratio : ≥ 103 dBA

• RF output power :10 mW

• Switching bandwidth : up to 24 MHz

• Operating time : approx. 10 hrs

• Modulation : wideband FM

• Output voltage : 1/4“ (6.3 mm) jack socket (unbalanced): +6 dBu, XLR socket (balanced): +12 dBu

• Housing : rugged ABS housing

• Dynamic range :dynamic

• Frequency : 8 frequency banks, each with up to 10 factory-preset channels

• Frequency range

  A: 548-572 MHz, GB: 606-630 MHz

  B: 614-638 MHz

  C: 766-790 MHz

  D: 794-806 MHz

  E: 821-832 MHz, 863-865 MHz

  K: 925-937.5 MHz

• Sensitivity : < 3 μV at 52 dB(A)rms S/N

• Squelch :adjustable from 3 dBμV to 28 dBμV (combined with pilot tone)

• Synchronization :2.4 GHz, Low Power OQPSK (only active during synchronization)

• Input sensitivity : 1.5 mV / Pa

• Adjustment Range Transmitter: 0 to -30 dB, adjustable in 10 dB steps

• Audio adjustment range :45 dB, adjustable in 5-dB steps

• Line / Mic level : 20 dB, switchable

• Temperature Range: operation: 0°C to +40°C, storage: –20°C to +70°C

• Receiver Principle : double superheterodyne

• Diversity principle :Antenna switching diversity via internal antennas

Receivers

• Weight :approx. 340g

• Power supply :Receiver: 12 V DC nom. / 300 mA

• AF frequency response :Receiver: 50 to 16,000 Hz (–3 dB)

Microphone

• Weight:approx :245g

• Power supply :Microphone: 2 AA size batteries, 1.5 V

• AF frequency response

  SKM 825: 80-14,000 Hz

  SKM 835: 80-16,000 Hz

The post Sennheiser XSW 1-825 appeared first on Megsstar Technology.